What a property risk survey report should contain
A survey report has two readers with different amounts of time: the underwriter deciding on terms, and the site manager who has to act on it. A good report serves both.
Start with an executive summary
Most readers will read the first page and little else. It should state what the site is, what is insured and for how much, the engineer's overall opinion of the risk, and the handful of issues that matter most. If there are high-priority recommendations, they belong here as well as in the body of the report.
Describe the risk in a consistent order
Underwriters compare sites, so the same information in the same order every time is worth more than elegant prose. The usual backbone is COPE: construction, occupancy, protection and exposure.
- Occupancy
- What happens on site, the processes and materials involved, and the hours of operation.
- Construction
- Each building's age, size, height, frame, walls and roof, including any combustible panels or linings.
- Protection
- Sprinklers, detection, hydrants and hose reels, the water supply behind them, and the fire brigade response.
- Exposure
- What surrounds the site, and natural perils such as flood, storm, bushfire and earthquake.
Cover the hazards and how they are managed
Describe the hazards specific to the occupancy, such as flammable liquids, dust, hot processes or high-piled storage, and the common ones found everywhere: electrical installations, hot work, smoking, housekeeping and waste. Then say how well each is controlled. Management practices, such as permit systems, impairment procedures, maintenance and self-inspection, often tell an underwriter more about a site than its hardware does.
Give the values and the loss potential
State the sums insured for material damage and business interruption, and note any dependencies that would extend an interruption: a single critical machine, a sole supplier, long lead times for replacement plant.
Make recommendations that can be acted on
Each recommendation should stand on its own: what was observed, why it matters, and what should be done. Give it a priority, and a reference number so it can be tracked between surveys.
Include photographs, with captions
A photograph of the frontage on the cover tells the reader immediately what kind of site this is. Further photographs in an appendix, each with a one-line description, support the findings in the body. Be careful with images that show security arrangements, and consider who the report will be shared with.
State what the report is and is not
Record the date of the survey, who carried it out and who accompanied them, and make clear that the report reflects conditions observed on the day.
Last updated 2026-10-06. General information for insurance and risk professionals, not advice on any particular site.